1、覆膜砂射芯機冬天里氣泵使用時應打好壓力，達到8-10個 2、二聯體的水胡里的油和水都要放凈，一免天氣寒冷凍結。

1. When the air pump is used in winter, the pressure should be made to reach the 8-10 2 and two of the oil and water in the water.

3、導柱一周清理一下，在油嘴里注射潤滑油。

3, guide the column to clean up one week, and injecting lubricating oil into the nozzle.

5、所有氣路，油路要定期查看保養 滄州海岳礦山機電設備有限公司專業生產覆膜砂射芯機，雙工位射芯機，水平射芯機，立式射芯機，全自動射芯機，雙射頭殼芯機，側面射砂殼芯機，覆膜砂熱芯盒，冷芯盒，翻砂模具，鋁型模具，鑄造模具等。確保砂機液壓，傳動及控制等部分，正常完好。

5, all gas road, oil road to regularly check and maintain Cangzhou Hai Yue mine mechanical and Electrical Equipment Co., Ltd. specializes in the production of film coated sand core machine, double station core ejection machine, horizontal core machine, vertical core ejection machine, automatic core ejection machine, double fire head shell core machine, side sand shell core machine, film coated sand core box, cold core box, sand and sand mold, aluminum type Mould, casting mold and so on. Ensure that the hydraulic, transmission and control parts of the sand machine are in good condition.

2、射芯機開動以后，操作人員不得擅離工作崗位，要按工藝程序，認真進行操作，不許同時操作兩個伐門。

2. After the core machine is started, the operator shall not leave the work place without authorization. He must operate according to the technological procedures and operate at the same time, and not to operate two doors simultaneously.

4、在生產過程中，經常清除射芯機上及其周圍的積砂,防止砂子進入氣缸。

4. During the production process, the sand on and around the core machine is often removed to prevent sand from entering the cylinder.

6、經常注意射芯機的運轉情況，發有潤滑不良、緊固件松動、零件損壞、管路漏流以及其它異?，F(xiàn)象，應立。

6, pay attention to the operation of the core shooting machine frequently. There are poor lubrication, fastener loosening, parts damage, pipeline leakage and other abnormal phenomena.