射芯機安全注意事項：
Safety precautions for core ejection machine:
1、芯盒合模時嚴禁用手扶著，以免將手夾傷。
1, when the core box is closed, it is forbidden to use your hands to avoid injury to your hand.
2、工作完后切斷電源，設備及工作場地應清掃干凈
2, cut off the power supply after work, and clean the equipment and work area.
3、嚴禁用手去清除模具粘砂需用加長氣管吹掉粘砂。
3, it is strictly prohibited to use hand to remove mold sand.
4、開動射芯機前嚴格檢查周圍是否有影響開機情況，有問題及時排除。
4, before starting the core machine, check whether there is any influence on the starting condition.
