1、首先，我們要折下射砂頭，清理其積砂和粘砂，切記，一定要清理干凈，以便下次使用。

1, first of all, we have to fold down the shooting sand head, clean up its sand and sand, remember that we must clean it up for the next use.

2、我們還要清理排氣塞內的粘砂，清理時，一定要仔細清理。

2, we also need to clean the sand in the exhaust plug. When cleaning, we must clean it carefully.

3、我們還要清除閘板上的積砂，并在閘板上涂石墨粉，以減少磨擦。

3, we have to clear the sand on the gate, and smear stone toner on the gate to reduce friction.

4、我們還要清除導軌和導桿上的積灰和積砂，并涂上一層潤滑油。雙工位射芯機

4. We also need to remove dust and sand on the guide rail and guide bar and apply a layer of lubricating oil. Double station core ejection machine

5、我們還要取下射砂筒，清除縫隙中的粘砂，最后用石蠟涂擦內壁，但不要將縫隙堵塞。

5, we also need to take down the shooting barrel, remove the sticky sand in the gap, and finally use paraffin to wipe the inner wall, but do not clog the gap.

6、最后，我們操縱各個電器開關，使設備各機構恢復到原始位置，然后切斷電源和氣源。

6, in the end, we operate various electrical switches to restore the original equipment to the original location, and then cut off the power and gas source.

射芯機在疊型鑄造中的應用

Application of core ejection machine in superposition casting

射芯機在疊型鑄造中的應用,使用射芯機進行芯型制作和芯型成形，合模時垂直疊放芯型，構成疊型澆注系統。成形強度高，流動性好，能夠制造形狀復雜的砂芯，砂芯表面質量好，其潰散性好，鑄件容易清理。

The application of core shooting machine in stacking casting uses core shooting machine for core making and core forming. When the mold is closed, the vertical stacking core is used to form the stacking gating system. With high forming strength and good fluidity, it can make sand cores with complicated shape. The surface quality of sand core is good, its collapsibility is good, and castings are easy to clean.

射芯機是壓縮空氣驟然膨脹把芯砂射入芯盒的機器。射壓式造型機是利用壓縮空氣將型砂均勻地射入砂箱預緊實，然后再施加壓力進行壓實。射芯機常用的有垂直分型無箱射壓射芯機和水平分型脫箱射芯機。雙工位射芯機

The core shooter is a machine that suddenly expands the compressed air and shoots the core sand into the core box. The injection molding machine is designed to compress the molding sand evenly into the sand box before compacting with compressed air, and then compress it with pressure. The core shooting machine commonly has vertical parting and no box shooting and core shooting machine and horizontal parting and debox core shooting machine. Double station core ejection machine

使用射芯機進行芯型制作和芯型成形，生產效率高，起模容易，砂型的尺寸精度高。由芯型疊加組成疊型澆注系統，在澆注時承壓力大，填充力強，產量及成品率高，在保證質量的同時生產成本也有所下降，能夠承擔高精度小型鑄件的大批量生產。

Core shooting and core molding are made by using the core shooting machine. The production efficiency is high, the mold is easy to be taken, and the size accuracy of the sand mold is high. The pouring system composed of core type superposition has large bearing pressure, strong filling force, high yield and high yield. At the same time, the production cost is reduced and the high precision small castings can be produced in mass production.